About this episode
Become a Jedi or Sith and build your own lightsaber with 3D printing and electronics from Adafruit.
Learn Guide
https://learn.adafruit.com/lightsaber-rp2040/
Adafruit RP2040 PropMaker Feather
https://www.adafruit.com/product/5768
RG LED Button
https://www.adafruit.com/product/3350
Mini Skinny NeoPixel Strip
https://www.adafruit.com/product/2969
Mini oval speaker
https://www.adafruit.com/product/3923
2200mah Battery
https://www.adafruit.com/product/1781
Powered by Adafruit's RP2040 PropMaker Feather, this iconic prop just got a whole lot better.
The all-in-one dev board is engineered for making props with motion activated lights and sounds - with better-sounding digital audio and a lot less soldering, it’s our easiest build yet!
Visit the Adafruit shop online - http://www.adafruit.com
-----------------------------------------
LIVE CHAT IS HERE! http://adafru.it/discord
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
-----------------------------------------
Get every episode summarized
Each time 3D Printing Projects publishes, we email you a written briefing from the transcript — the topics, who appeared, and any specific claims, with the ad reads skipped.
Email me new episodesFree for 3 shows. No card needed.
Hosts & guests
No transcript yet
This episode has not been transcribed. Request it and it moves to the front of the queue.
More episodes
