About this episode
Build a 3D printed prop with a realistic looking flame! Use NeoPixels and GEMMA M0 to create a faux yet realistic looking torch. Hidden inside the torch is a mini fan and silk fabric. Use CircuitPython to easily program GEMMA M0 and NeoPixels.
Learn Guide
https://learn.adafruit.com/neopixel-flame-torch/
Adafruit GEMMA M0
https://www.adafruit.com/product/3501
Adafruit 5V MiniBoost
https://www.adafruit.com/product/4654
7 NeoPixel Jewel
https://www.adafruit.com/product/2226
5VDC Fan
https://www.digikey.com/product-detail/en/cui-devices/CFM-5010-03-10/102-4012-ND/6194920
2200mAh Battery
https://www.adafruit.com/product/1781
Inspired by Nick Dimelow's Medieval Torch project.
https://www.prusaprinters.org/prints/38051
Visit the Adafruit shop online - http://www.adafruit.com
-----------------------------------------
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
-----------------------------------------
Get every episode summarized
Each time 3D Printing Projects publishes, we email you a written briefing from the transcript — the topics, who appeared, and any specific claims, with the ad reads skipped.
Email me new episodesFree for 3 shows. No card needed.
No transcript yet
This episode has not been transcribed. Request it and it moves to the front of the queue.
More episodes
