About this episode
You can add USB-C Power to your devices with the Adafruit HUSB238 Power Delivery Breakout.
This breakout lets you get up to 100W of power over USB-C for those projects that need more than 5 volts at 2 amps.
You can set the output voltage using the on-board jumpers or control it over I2C using a microcontroller.
Learn Guides
https://learn.adafruit.com/case-for-husb238
https://learn.adafruit.com/adafruit-husb238-usb-type-c-power-delivery-breakout
Adafruit HUSB238 Breakout
https://www.adafruit.com/product/5807
Visit the Adafruit shop online - http://www.adafruit.com
-----------------------------------------
LIVE CHAT IS HERE! http://adafru.it/discord
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
-----------------------------------------
Get every episode summarized
Each time 3D Printing Projects publishes, we email you a written briefing from the transcript — the topics, who appeared, and any specific claims, with the ad reads skipped.
Email me new episodesFree for 3 shows. No card needed.
Hosts & guests
No transcript yet
This episode has not been transcribed. Request it and it moves to the front of the queue.
More episodes
